Force fan power on

peirof

Hi,

i think a fan is not working well…

There is some gcode, for power on fanX?

Thanks

peirof

hi,

with this lines in [c]config.g[/c],…..

[[language]]
; Fans
M106 P0 H-1							; Ventilador controlado por gcode
M106 P1 S1 I0 F500 H2 T70                                       ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned 
M106 P2 H-1							; Ventilador controlado por gcode

Fan 0 and Fan 2, are controled by gcode? layer fans
Fan 1 are controled by tenperature, nozzle temperature. No?

peirof

Wiki has the answer…

M106 and M107

Sorry