Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Fine tuning Z

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    2
    2
    407
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ronnien58undefined
      ronnien58
      last edited by

      I have set my z offset at .7 as reported by the M114 command after calibrating z home. But when i went to print i had to raise the nozzle using baby steps up .5. Do i need to add or subtract from my z zero that i set in the config. file to print correctly the next time?

      1 Reply Last reply Reply Quote 0
      • stephencundefined
        stephenc
        last edited by

        I believe it should be subtract to increase gap between nozzle and bed

        and add to decrease gap between nozzle and bed

        Stephen
        https://github.com/stephenci/ZideX

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA