Guide for Delta calibration/mesh leveling needed
-
hi there,
Im new to duet electronics, i just finished to setup the delta but I found the provided online documentation very dispersive, is there any clear guide step by step for calibrating mesh leveling a delta from the beginning ?where can I also find a list of all supported command by the duet in the documentation ?
-
See https://duet3d.dozuki.com/Wiki/Calibrating_a_delta_printer for calibration. A well-built delta shouldn't need mesh compensation once you have calibrated it, but if yours does then see https://duet3d.dozuki.com/Wiki/Using_mesh_bed_compensation.
-
where can I also find a list of all supported command by the duet in the documentation ?
All the supported Gcodes are here:
https://duet3d.dozuki.com/Wiki/Gcode
