New Day New Errors. M30: Filename expected



  • Everytime i try to change temps or speed in the machine i get a error messange saying.

    the console right now looks like this
    12:06:11M220 S85
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    12:03:42G10 P1 S220
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    12:02:35G10 P1 R170
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    12:01:50G10 P1 S215
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    12:01:44G10 P0 S215
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    12:01:07Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:42:42Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:42:40Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:28:54Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:26:12T1
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:25:56T0
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:25:16G10 P0 S210
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:25:08T1
    Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m
    11:24:52Error: M30: Filename expected
    Finished printing file T0-20x20x20.gcode, print time was 0h 24m

    and the weird part is i printed 3 files after the T0-20x20x20.gcode file. what going on?



  • Can you post the gcode for that file?

    It would seem like there are M30 commands in it somehow.



  • i have m30 in the end of all my gcode files. are it not supported in reprap firmware as a quit program?





  • oh that explains alot ๐Ÿ˜„ iยดll remove it hehe ๐Ÿ˜„


  • administrators

    Perhaps you meant to use M0 instead?


 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.