Simulate Fails - Not enough axes are homed



  • Within the gui, I right click and simulate a file that was uploaded with slic3r PE and sometimes it says something like this:

    M37 P"mount6.gcode"
    Simulating print of file mount6.gcode
    Cancelled simulating file mount6.gcode after 0h 0m simulated time    
    Error: G0/G1: insufficient axes homed***
    

    This is in the console in the web. Sometimes it does work, and sometimes it doesn't.


  • administrators

    This is already fixed in 2.0beta.


Log in to reply