Connectors
-
Hi,
looking to clean up the cabling on my rig, and am wondering if the ground connectors and 3.3v connectors can be soldered into two different pins as illustrated by the diagram but connected to the individual connectors on the duet.can the same thing be done with the nema 17 motor connectors
-
You can use +3.3V and GND from one endstop connector to power more than one endstop.
You cannot share any stepper motor wires.
-
Hia thnks
how many more connectors can be sharedand how does the cr-10 do it
kind regards