Level height Assist

[AS-3D Druck]

Hello Guys,
i got a few days ago problems with my Heatbed that it was out of Level and G29 tryed to compensate that without big sucess.
So i thought i could get the values from the heightmap.csv and calculate how many turns i have to do on my knob. (M3 Screw with a Pitch of 0,5mm)
A few printer out there got that Level Assist already and i think it would be cool if we got that aswell.
I can try to write a little Script at php but i'am not that good so .... those are my thought that i wanted to share with you.

[T3P3Tony]

@as-3d-druck Have you seen:

https://duet3d.dozuki.com/Wiki/Using_the_manual_bed_levelling_assistant

[AS-3D Druck]

THX i totaly missed that Feature.
But maybe a Visual Interface on the Webinterface or something to start that Command (on the drop Down Menu of Autobed Compensation) would be awesome.