Duet 2 v1.04 and Sale!
-
Today we are announcing a minor hardware update to the Duet 2 (Wifi and Ethernet).
Duet 2 Wifi & Ethernet v1.04
Changes:- Provision of a miniblade fuse for the Motors and heaters - Supplied with a 7.5A fuse
- Provision of a miniblade fuse for the Heatbed - Supplied with a 15A fuse.
- Replaced erase switch with an erase jumper
- Changes to some component layouts, and trace routing to further improve EMI performance.
Sale
We have some Duex2 1.03s left in stock so are running a 15% sale until they are sold out.- https://www.duet3d.com/DuetEthernetSale
- https://www.duet3d.com/DuetWifiSale
Also PanelDue + 5 inch screen are on sale as well ! - https://www.duet3d.com/PanelDue
Documentation
I have gone through and updated the documentation in the major places (hardware overview and wiring) however if anyone spots somewhere that needs a bit for a refresh please let me know.
Source
Files are here:
https://github.com/T3P3/Duet/tree/master/Duet2/Duet2v1.04 -
@t3p3tony Now I sit here and want to have the new hardware revision - and my Duet is only 2 months old.
Manuel
Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
with probably always latest firmware/DWC (incl. betas or self-compiled)
My Tool Collection -
@wilriker said in Duet 2 v1.04 and Sale!:
@t3p3tony Now I sit here and want to have the new hardware revision - and my Duet is only 2 months old.
yep know the feeling!
-
I have x5 and I am wishing I had the hardware revision.
I might actually look at adding fuse protection with the mini blade type to my existing boards.
-
@calvinx for the bed it's straight forward to add fuse in the circuit, does not have to be on the board. Those people using high power beds also sensibly add thermal fuses etc.
For the hotend heaters once again a fuse can be added into the circuit. For the stepper motors it's not as straight forward but also. lower risk.
-
@t3p3tony said in Duet 2 v1.04 and Sale!:
@calvinx for the bed it's straight forward to add fuse in the circuit, done not have to be in the bed. Those people using high power beds also sensibly add thermal fuses etc.
For the hotend heaters once again a fuse can be added into the circuit. For the stepper motors it's not as straight forward but also. lower risk.
I already have thermal fuses to all my beds as they are on A/C with SSR's.
I will study the pdfs and compare, added protection is always nice if not 100% always required.
thanks for the prompt reply.
