Guide: G-Codes not implemented
-
An unimplemented code conflicted with itself? Then, use the unimplemented code in place of another unimplemented code that also conflicts with -itself.
Caution, unimplemented trap, stack overflow, cannot resolve logic.https://duet3d.dozuki.com/Wiki/G-Codes_not_implemented
G-Codes not implemented which are not planned for implementation"M207: Calibrate z axis by detecting z max length (Clashed with existing meaning of M207)"
"M208: Set unretract length (Clashes with M208 Set axis max travel and can be achieved using M207)"
-
What is means is that the master list at https://reprap.org/wiki/G-code lists two meanings for each of those codes, and RepRapFirmware doesn't implement the second one.
