Navigation

    Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    Replacing fried TMC2660

    Duet Hardware and wiring
    3
    4
    469
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • kojderek
      kojderek last edited by

      Re: Choice of TMC2660

      Is it hard to replace fried driver on DuetWifi 1.02 board. I have two spare TMC2660 chips and. Soldering is not the problem for me. Does the TMC2660 requires additional config or flashing after soldering to Duet PCB board ??

      1 Reply Last reply Reply Quote 1
      • dc42
        dc42 administrators last edited by

        No the TMC2660 does not require any other action after it is replaced.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 1
        • kojderek
          kojderek last edited by

          Is there thermal paste or additional solder point under the driver chip ??

          T3P3Tony 1 Reply Last reply Reply Quote 1
          • T3P3Tony
            T3P3Tony administrators @kojderek last edited by

            @kojderek no, the thermal conduction is through the pins, that is why the high current and high thermal conductivity is two sets of two pins for each channel.

            Duet Hardware Designer
            www.duet3d.com

            1 Reply Last reply Reply Quote 1
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA