180W 12V Silicone Heater Pad
gbiski last edited by
I have the Duet 2 wifi and i purchased a 180W 12V Silicone Heater Pad for 3D Printer Heated Bed with NTC 100K.
Is it ok to connect the bed directly to the duet without an external SSR (mosfet) ?
As a setup i will have also an E3D Titan Aero a duet screen and three 17 nema stepper motors 0,9o angle.
@gbiski that should draw a max of 15A so under the 18A max for the heatbed on a Duet2