Levelling 2.0 - Get the maximum out of your Duet :-)
just wanted to show you what all is possible using a Duet Wifi
- G28 home all axis
- G32 - auto bed compensation. There are 2 servos "popping" up to define a fixed point for the BLTouch to level the Z-Axis
- Clean the nozzle
- Mesh bed compensation (this is no longer shown on the video)
Everything solved using macros
(here you can see the servos popping up more detailed: https://www.youtube.com/watch?v=e0h5YHoAH68 )
I really like the Duet!
TheRulesLawyer last edited by
Interesting. Are you automatically wiping your nozzle with that brass brush too?
sungod3k last edited by
Whats your reasoning behind homing on the servo and not on the bed?
Seems like an extra step.
@sungod3k Leveling on Servos is to correct possible misalignment on the x-axis caused by 2 independent Stepper motors on the right and left. So you get 2 fix points that never change. As the bed is moving / print parts are taken off / it heats up and cools down etc. It gets uneven from time to time. So the error would be potentiated.
@theruleslawyer yes 😎