power failure

juanmena

I had a power cut and created resurrect.g

; File "0:/gcodes/Carro.gcode" resume print after power failure at 2018-10-30 08:12
M140 P0 S60.0
G10 P0 S195 R195
T0 P0
G92 X113.180 Y121.441 Z37.000
M98 Presurrect-prologue.g
M106 P0 S1.00
M106 P1 S1.00
M106 P2 S1.00
M106 P3 S0.00
M106 P4 S0.00
M106 P5 S0.00
M106 P6 S0.00
M106 P7 S0.00
M106 P8 S0.00
M106 S1.00
M116
M290 S0.000
G92 E0.00000
M83
M23 0:/gcodes/Carro.gcode
M26 S29544617 P0.000
G0 F6000 Z39.000
G0 F6000 X113.180 Y121.441
G0 F6000 Z37.000
G1 F750.0 P0
M24

I do not have the resurrect-prologue.g file, and I do not know what I have to do or put in it.

Thanks for the help.

T3P3Tony

@juanmena check out the documentation here:
https://duet3d.dozuki.com/Wiki/Setting_up_to_resume_a_print_after_a_power_failure#Section_Setting_up_the_sys_resurrect_prologue_g_file