Fresh install, cannot home axis
-
Hi, i upgraded my Tevo Little monster (delta style printer) to duet wifi. After installing the firmware i cant even home the printer, the motors move chaotically and never stops. It seems like i did a bad wiring but i triple checked it and even after having redone all the contacts it still is not working. Any idea?
-
I'd first test each motor individually to make sure they are running in the right direction:
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareDeltaPrinter.
-
@ayudtee said in Fresh install, cannot home axis:
I'd first test each motor individually to make sure they are running in the right direction:
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareDeltaPrinter.And after that, test the endstops using M119 or the Machine Properties page of DWC.
