Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    JTech Laser

    Scheduled Pinned Locked Moved
    Laser Cutters
    2
    3
    618
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Zandrundefined
      Zandr
      last edited by

      I was looking at how to setup a laser with the DUET wifi and i know there is a how to here https://duet3d.dozuki.com/Wiki/Laser_PWM_control but insted of making a board buy a laser kit from JTech.

      They have a page https://jtechphotonics.com/?page_id=5802 that shows how to connect to a Melzi Board as well as other how to pages.

      Would this work using JTech laser driver and linking the 2 wires from the laser board to fan0 ?

      Thanks in advance

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        If it works with a Melzi fan output then it should work with a Duet fan output too. The product page says it has an optically isolated control input accepting 2.8V to 36V, which confirms that.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • Zandrundefined
          Zandr
          last edited by

          Thank you

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA