Duet for 350 Degrees Celsius Printer
-
Hi all.
Im considering a modification of this board into one of my printers.
I want to run it at 350 deg cel. on the hotend.
and 140 deg cel on the heat bed
I need to know what other pieces I need, besides the board, to do this.
ive been printing for over a year and have 4 printers.
I want to print in polycarbonate.
Have a good day. -
To measure 350C accurately I suggest either a high temperature PT100 sensor or a thermocouple. So you will need the PT100 or the thermocouple daughter board as well as the Duet.
