Re: Duet for 350 Degrees Celsius PrinterIm a little confused as to which one I would need or both ? I would like to take a core xy printer off the shelf IE a Ender 5 and put this board in it. using most of it as too power supply and all motors and such. change the hot end to a all metal one build a heater box for this. place all relevant parts into this and relevant parts on the outside. I need to achieve 350c at the hotend and 150c at the build plate. Im hoping this board will do this easily but I dont know what else I would need. I dont want to go down the path of finding this is wrong and a waste of money. if this works with printing polycarbonate I will copy this several times.

Hi all.
Im considering a modification of this board into one of my printers.
I want to run it at 350 deg cel. on the hotend.
and 140 deg cel on the heat bed
I need to know what other pieces I need, besides the board, to do this.
ive been printing for over a year and have 4 printers.
I want to print in polycarbonate.
Have a good day.