Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Ezabl mini direct connect z probe from th3d

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    4
    6
    876
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Government_Baconundefined
      Government_Bacon
      last edited by

      Im having touble with my ezabl. keeps saying trigger before probing.

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        You will need to tell us how you have connected it to your Duet, and how you have configured it in your M558 command in config.g. Also some information on what type of output it provides.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • Government_Baconundefined
          Government_Bacon
          last edited by

          I have it connected to the probe in and ground and the M558 P5 I1

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators
            last edited by

            Perhaps it doesn't need the i1 part? Test the probe as described at https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • TheRulesLawyerundefined
              TheRulesLawyer
              last edited by

              I just hooked mine up and if the probe in and ground were reversed, it never triggered. Can you see it go from 0 to 1000 in the UI? If so you need to add/remove the I1 modifier from M558. If not, you probably have the ground and Signal wires swapped. Polarity matters here.

              1 Reply Last reply Reply Quote 0
              • falcarundefined
                falcar
                last edited by

                I have this working on my machine:
                M558 I1 P5 H5 F120 T6000

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA