Tevo Little Monster initial setup
peirof last edited by peirof
Some days ago, i have changed config.g, in my Tevo Little Monster... And now, i am having issues after 2 layers, maybe 3.... I think its a geometrical problem, after change config,g, M665 changed.....
Now i start print ok.... but in 2 layer maybe 3 layer, nozzle start scratch printed part.... i Suppose is a M665 issue, but i am not sure what are the corrects values.... i have find this in facebook TLM Duet users group.....
Can someone that have this printer tellme the correct M665
I have find these:
Set delta radius, diagonal rod length, printable radius and homed height Ver. 1 --> M665 R157.0741 L397.19 B157.0741 H520 Ver 2 --> M665 R150 L360 B170 H550 Ver. 3 --> M665 R150 L398 B150 H524.871 Ver. 4 --> M665 R157 L397.1073 B175 H525 I have (12/02/2019) --> M665 R157 L397.1073 B175 H489.0 First Test (12/02/2019) --> M665 R157 L365 B160 H489
Tef9 last edited by
This is mine:
M665 R170 L397.19 B155 H525 ; Set delta radius, diagonal rod length, printable radius and homed height
I changed the R value it was 155.
Hope this helps
peirof last edited by
M665 R170 L397.19 B155 H525
thanks to all help me to find the way.
After adjust M665 in config.g, great print.... Its only a test object.
And the measures.... very aceptable.
Teorical measures are 30x30 mm and 20 mm between horizontal lines.
Printed dimensions are 30.23x30.30mm and 19.67 mm between horizontal lines