Ender 3 using DUET 2 Maestro w/Panel Due 5i (Homing Issue)
bfpa40 last edited by
I have a Ender 3 printer which I just installed the DUET 2 Maestro on. My first question is there someplace online that has a guide for what to setup in the RepRapFirmware for this Printer? I am having issues with homing. Is the home position where the endstop switches are located? My X axis moves away from the endstop switch when i press the X Home Button once arriving there grinds and tries to continue causing me to have to power off the printer. Now when I press the Y Home button the hotbed travels toward the endstop switch but once arriving there grinds and tries to continue causing me to have to power off the printer. The Z axis when i press the Z Home button it travels 2.50 units upward and stops each time I press Z Home.
I know there has to be someone who can offer guidance as to what to do in order to get me started in the correct programming sequence.
Phaedrux last edited by
These links should help.
I believe that endstop switches will need to be wired to the 2 outside pins of the connector.