@phaedrux I used DuetWebControl-SD.zip and updated it from the DWC

@jay_s_uk Attached as a fileyat.txt

@lofytume Restarted and now M122 gave me this:
=== Diagnostics ===<LF>RepRapFirmware for Duet 2 WiFi/Ethernet version 3.0 running on Duet WiFi 1.02 or later<LF>Board ID: 08DGM-917NK-F23T0-6J1F0-3SJ6P-TY8WG<LF>Used output buffers: 1 of 24 (21 max)<LF>=== RTOS ===<LF>Static ram: 30516<LF>Dynamic ram: 91160 of which 0 recycled<LF>Exception stack ram used: 272<LF>Never used ram: 9124<LF>Tasks: NETWORK(ready,776) HEAT(blocked,1464) MAIN(running,4124) IDLE(ready,156)<LF>Owned mutexes:<LF>=== Platform ===<LF>Last reset 00:00:24 ago, cause: power up<LF>Last software reset at 2022-03-14 11:56, reason: User, spinning module GCodes, available RAM 11520 bytes (slot 0)<LF>Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d<LF>Error status: 0<LF>Free file entries: 10<LF>SD card 0 detected, interface speed: 20.0MBytes/sec<LF>SD card longest block write time: 0.0ms, max retries 0<LF>MCU temperature: min 16.8, current 19.5, max 19.6<LF>Supply voltage: min 0.5, current 24.2, max 24.4, under voltage events: 0, over voltage events: 0, power g[Warning: Maximal number of characters per line exceeded! Check the line break settings in Terminal > Settings > Text or increase the limit in Terminal > Settings > Advanced.]

@jay_s_uk I'm able to connect with YAT via USB. Tho M122 seem to do nothing

@jay_s_uk

@jay_s_uk When I try to connect over Wi-Fi with browser.

@jay_s_uk I can not get connection so I can not post anything to console

Hi!

I tried to update my Duet 2 wifi board and now I can not connect to it.
It just says "Failed to connect to 192.168.1.61 Incompatible firmware version"
I tried to upload DuetWebControl-SD. I think that was not the right one
What to do now?