So, I am making progress on getting my mini12864 to function but I have some confusion when it comes to the LED back light command.
Do I need to connect a separate wire and then Activate the M150? Or is that LED connection already established in my custom loom?
Thanks for the help this forum is a life saver.
So I read on a different forum that my BigtreeTech mini12864 may need to be plugged in with the exp1 and exp2 swapped and the connectors rotated 180 degrees. Can anyone confirm that is also the case with the duet2 wifi.
This information was specific to a Fystec spider board.
I see now that I am a fool and ignored the big "N" in the table for the ST7920 in the table for Duet2 WIFI. Luckily I have purchased a ST7567 and I will retry my efforts. I can look through the forums but if you happen to have any links handy that involve the mini12864 Bigtree tech and the duet2Wifi that would be great.
I was able to create a Menu Directory and upload the files. I guess my understanding was that a "Display" option is suppose to be available in the Files menu, where the filaments, jobs, macros, and system files are.
Hello,
I have followed all the directions that I can find on the topic of hooking up a 12864 Display to my Duet2 Wifi. The one thing I have seem to have missed is how to get the Duet Web Control to display the "Display" function. I was able to make the custom wired cable for the 12864 and it powers up and displays nothing which seems right. But I can't seem to convince my duet2 wifi to communicate with the screen. Any help on this topic would be greatly appreciated. I seem to be just chasing my tail at this point in time.
In addition, I have added the M code into my config file to activate the screen.