5V_INT factory default.
I bought it from SPOOL3D.ca and received it on April 16th, 2024.
5V_INT factory default.
I bought it from SPOOL3D.ca and received it on April 16th, 2024.
Nothing else is connected to the board, and yes, there is a jumper on the 5V selector.
I did try different cables. All my other devices, Arduinos and ESP32s, work fine. Also, when I supply 24V power to the board, communication works fine through the same cable and with the same computer.
I'm trying to set up my new DUET3-MAIN-6XD (REV 1.01). When I connect the board to my computer over USB, none of the LEDs turn on, and I can't establish a connection. However, everything seems to work fine if I connect the board to 24V. According to the setup guide, powering the DUET3-MAIN-6XD other than through USB should not be necessary to establish a connection and run Duet Web Control.