Hello everyone,

I am currently working on connecting multiple SERVO driver motor systems to a 6XD board. Specifically, I am using the .
https://www.omc-stepperonline.com/fr/kit-de-servomoteur-ac-serie-t6-1000w-3000rpm-3-18nm-encodeur-23bits-ip67-t6-rs1000h2a1-m23

I have already read several forum posts on this topic and am now wondering what the best approach is. The external driver signal is output via the Driver0 - Driver5 connectors on the 6XD board with a nominal potential of 5V (min. 4.2V @ 20mA). However, the motor drivers from Stepperonline require a 24V signal.

I have read that the signal can be converted using a level converter. Has anyone had experience with whether this solution works?

Here are some level converters I found:

https://www.amazon.com/dp/B07KQRGN32/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B07KQRGN32&pd_rd_w=zKT8h&content-id=amzn1.sym.953c7d66-4120-4d22-a777-f19dbfa69309&pf_rd_p=953c7d66-4120-4d22-a777-f19dbfa69309&pf_rd_r=Y0YWNQG41C8RBCPRZTV1&pd_rd_wg=AcSRN&pd_rd_r=2a9eb409-5b9c-461b-b2ea-539412c81931&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWwy

https://de.aliexpress.com/item/33021062283.html?gatewayAdapt=glo2deu

6XD to Yaskawa Breakout on GitHub https://github.com/SynchronicityLabs/6XD_to_Yaskawa_Breakout @Maestro

Additionally, I am wondering if the Stepperonline drivers, along with the 6XD board (possibly with a CAN Bus expansion board), can also be controlled via CAN Bus.

I look forward to your feedback and experiences!

Thank you in advance