Please add inverted M80/M81 for meanwell PSUs.
I know. I'm inpatient. Is it a lot of work to implement this?

Hey, this requires DWC 3.2-beta3 but there is no beta3 on github? Only beta2.
Compiling the source code of DWC results in "Plugin requires incompatible DWC version (need 3.2.0-beta3, got 3.2.0-beta3pre)"

Please add inverted M80/M81 for meanwell PSUs.
I know. I'm inpatient. Is it a lot of work to implement this?

@dc42 Yes. This.

Any plans for M80/M81 support for meanwell PSUs?
I know I asked this before. Like many other. Is this anywhere on a plan?

At one point there was a topic about 3.0 having the possibility to have M80/M81 inverted for those meanwell PSUs working exactly the opposite way of ATX PSUs.
This is not in this release or is it? Did not see it in the changelog.

Yes. That is what it was.
I guess sometimes it helps when somebody else looks over it after being on it for too long
Thank you!

Hi.
Usually I try to solve issues myself however with this one I'm at a loss.
I have a Hypercube Evolution with a duet wifi and created my configuration with the configurator (https://configurator.reprapfirmware.org/).

Now the issue I have.
When I home all axis and then enter G1Z0 in the gcode console the nozzle touches the bed just fine since I have configured the Y offset for the BL Touch just fine.
However, the moment I run G32 the nozzle does not touch the bed anymore after G1Z0. Instead it is way above the bed at about the distance between the bed and the created plane/mesh (this also seems to happen with G29).
I will attach my config below.

Not sure what to do anymore. I have read the following topics about probing and followed the instructions and set the offset between the BL Touch and nozzle correctly (since it works before G32):
https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_BLTouch

My goal is to use two independent z motors to level the bed before every print.
For that I successfully used this guide: https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors

12_1524933365731_tpre0.g 11_1524933365731_tpost0.g 10_1524933365731_tfree0.g 9_1524933365731_stop.g 8_1524933365731_sleep.g 7_1524933365731_resume.g 6_1524933365731_pause.g 5_1524933365731_homez.g 4_1524933365731_homey.g 3_1524933365731_homex.g 2_1524933365731_homeall.g 1_1524933365731_config.g 0_1524933365731_bed.g