@dc42 Hi, looking forward to hear from you on subjected requirement. I need to finalize hardware for my machine.

@dc42 Sure. will wait for your call. Email: cstpatel@gmail.com

@dc42 my skype ID : cstpatel

@dc42 said in Using 5 Extruder on 3D Printer.:

s this a one-off build, or a machine that you plan to manufacture?

I plan to manufacture this machine.

The machine i am developing is for Plastic Embroidery on textiles. Based on embroidery designs and fabric area I need to enable and disable individual extruder and its Z Axis. There are 5 Extruders (with its Z Axis) each covering 400 mm area of print bed. Machine's print bed size is 1200 mm x 2000 mm.

Can I make a skype call?

Yes, There would be 5 separate Z Axis driven individually. Bed compensation is not necessary in my case. i need is total 13 separate Axis, one for X, two for Y, five for Z and five for extruder.

This is specialized application for textiles.

I am designing 3D printer (Cartesian type) with dual Y axis, one X Axis, 5 Extruder with individual Z Axis.

Can Duet Control Board handle this?
All extruder will be printing same design.