@moriquendi Thanks, I look forward to reading about it.

Hi there,

Can I use this with an E3D titan Aero? if so do you have a link to details of how to?

Haha, teach me to look properly. Spotted it on the main website. amyone got alternative mounts? im printing on a BLV mod with mgn 12 rail on top of an alu 2020 extrusion so getting a decent hotend mount for the aero is proving challenging....

Cheers

James

Hi.

Got a Duet Wifi (genuine from E3D) and installed it on a BLV mod of the ANet A8. To be fair theres nothing of the original machine left near enough now.

My problem is that when a print finishes the hotend pauses a second or two while still in contact with the part before the z axis lifting then the x and y axis homing.

This results in a small dimple in the part. what command, and where can I use to get the head to lift 5mm or 10mm immediatly the print finishes without a pause? Is it somethign to go in the Duet files? or the slicer? Im using latest version of Cura.

Thanks

James