I have the exact same problem. The probing is to slow for my piezo, but speeding up the max speed is way to fast for normal movements ob the bed. Is there already any solution so this "slowing down" ?

i am asking me the same question atm. did you solve it? i have a version without the "wire" to remove.

this are great news. thanks! unfortunately i didnt buy it from duet3d directly, but from makerdise.com. how should i proceed under that circumstances? @T3P3Tony

@dc42 i am maybe a bit impatient, but are there any news in this topic?

thank You!

they asked me to open this forum Post and After the First few posts they thought i damaged it myself, because the most likely reason was that i created a short.
it would be really nice if i could get warranty because i didnt Do anything harmful to the Board (at least i dont know about something). Do you think i should try to contact your Support Directly?

@dc42 thanks for your informative answer. the WiFi Was working before i tried my soldering skills on the U11, thats why i wanted to figure out what i might have damaged
the Board is only 6 Weeks old thats why i asked the Internet Shop where i bought It if warranty is an option, but they refused. Do you think i should ask at the headquarters in uk?

okay, thanks. i guess you are right. i can do a firmware upgrade and everything works fine, but it looks like the processort cant communicate with the wifi chip properly. I can set the wifi to active and inactive but connecting to my wifi will result in an error every time. Additionally, as already pointed out, the update of the wifi firmware itself wont work...

Thanks for the hint. i renamed it and recognized that there was already a file like this in the sys folder. i replaced it anyways with the new one but i get the same result "installation failed..."

@SupraGuy
i tried that already, but thanks for your help

@dc42 said in Duet Wifi heats Bed and Hotend from start:

M997 S1

i placed DuetWiFiServer-1.21.bin on the sd card and tried your command. But i guess it doesnt work as expected. This is what i get back:

M997 S1
Trying to connect at 230400 baud: failed<LF>Trying to connect at 115200 baud: failed<LF>Trying to connect at 74880 baud: failed<LF>Trying to connect at 9600 baud: failed<LF>Error: Installation failed due to comm write error<LF>ok<LF>

thanks for the fast reply

edit: i tried it in root and in sys directory