Ok, i have upgradet the firmware and give it a try. When the error comes up, ill report it.

I do nothing. The Printer prints for a time and then the error shows up during the print. Ive printing the same file during the last 5 days, 4 days without Problems. It wondering me too, i dont tell the printer to do things. Ive tryed another file and the error still occurs.

Wifi Reported error: no known networks found

Error: m587: faules to add ssid to remembered list http is enabled in Port 80 FTP is disabled telnet

After a restart i can use it as usual.

Hi ive got the errror M587 since yesterday at a random time after i have started the print. The Printer stops after the error. Does someone know whats going on here?

Sorry for the late answer, got it from reprapworld. Is it enough or do u need something like a invoice ?

Dont ask me why but now it works Oo
Thanks for the support, i hope it will work tomorow too...

But there was another thing i have allready fixed, only for your Information.

The soldering points on the SD Card Socket are not soldered well, got problems to read the SD Card, after resolder it the SD Card works fine

Yes its the same IP
, i can see other WLAN devices like my Smartphone.

Hi,
got a strange Problem. On my Laptop with WLAN the Duet is shown up in the network scan and the interface is working fine. When i try to scan with my tower PC via cable Ethernet the Duet isnt shown up in the scanning result and cant connect to the web interface.

It seems that every Device can cannoct with Wifi but not with "cabled" ethernet.

Both PC got Win10 and firewall is deactivated.