@r3play Thanks for your help, youve been amazing. solved what i couldnt in minutes

@r3play one more question. it throws an error Error: Invalid servo index 7 in M280 command when probing the Z but i cant find any reference to the servo 7 in config.g or the homeall or homez. any ideas?

@r3play said in Need some help getting the Duet wifi + bltouch to cooperate:

M307 H7 A-1 C-1 D-1 ; dissable heater 7 for bltouch

will do, thanks

@r3play Thanks for your help, youve been amazing. solved what i couldnt in minutes

@eldrad that did work, then it went back up and did it again... now to find the bit to move the y axis under the probe... then working out how to mesh level lol.

@r3play missed that bit. will trigger it again and leg it to the other room to press it in

@r3play It deployed the probe that time when diving so thats a big step forward.. but the y axis was out of the way so didnt trigger... now to find where ive cocked up

@r3play right thats enabled the probe up and down etc

@r3play Ive changed the pins to match the ones pictured. when i try and run the commands you listed it responds with
M280 P3 S10 I1
Error: Invalid servo index 3 in M280 command

@r3play As you have written they dont work.
M280 P7 S10 I1 ; Send PWM channel 7 the s10 (angle) command
M280 P7 S90 I1 ; Send PWM channel 7 the S90 (angle) command
M280 P7 S120 I1; Send PWM channel 7 the S10 (angle) command
M280 P7 S160 I1 ; Alarm Release and Push-Pin UP

The ones i have written above i have set macros for and they function ok. Looking at it i may have introduced a different p number on one or two things in testing from looking at other peoples guides.. wonder if that is a big issue

@r3play said in Need some help getting the Duet wifi + bltouch to cooperate:

M500

that did indeed generate it
; This is a system-generated file - do not edit
; Heater model parameters
M307 H0 A193.0 C719.9 D8.7 S1.00 V0.0 B0
M307 H1 A219.0 C128.0 D13.9 S1.00 V0.0 B0
M307 H2 A340.0 C140.0 D5.5 S1.00 V0.0 B0
M307 H3 A340.0 C140.0 D5.5 S1.00 V0.0 B0
M307 H4 A340.0 C140.0 D5.5 S1.00 V0.0 B0
M307 H5 A340.0 C140.0 D5.5 S1.00 V0.0 B0
M307 H6 A340.0 C140.0 D5.5 S1.00 V0.0 B0