Ok so after looking at cad model and drawings of connector pins should be compatible
So verry carefully did crimp them again and it works, cheapo crimping tool i think its to blame
U can pull out crimped cable by loads of force destroying pins btw
So another question
I got screened cables so why not to make a use of it ?
Since duet dont have dedicated point for it where will be best point to connect screen ?
Frame ?

@dc42 I bought wurth pins for molex kk style shells as was have a few pins in wurth bag, thats work great together
but for 6 pin and 2 pins i bought molex microfit pins and dosent match
after ripping my hairs off my head id notice that black shells got WE writings so i assume i got all shells from wurth
By the way its ur delta design printer

So it seams to molex micro fit type plugs for smart effector are a wurth electronics and molex pins dont match

Hi
Any one know what exactly pins i need to duet and smart effector ?
I bought unfinished delta project (a lad making it sadly passed away and got it from his wife)
I got plugs but not all the pins so im going to order pins and complete printer
Thanks

Ok got it
So i got all shells and few wurth pins left
For smart effector i need molex microfit 3 female pins
Any one know if duet sells bags of wurth pins on its own ?