Posts made by Tomson

Ok so after looking at cad model and drawings of connector pins should be compatible
So verry carefully did crimp them again and it works, cheapo crimping tool i think its to blame
U can pull out crimped cable by loads of force destroying pins btw
So another question
I got screened cables so why not to make a use of it ?
Since duet dont have dedicated point for it where will be best point to connect screen ?
Frame ?

@dc42 I bought wurth pins for molex kk style shells as was have a few pins in wurth bag, thats work great together
but for 6 pin and 2 pins i bought molex microfit pins and dosent match
after ripping my hairs off my head id notice that black shells got WE writings so i assume i got all shells from wurth
By the way its ur delta design printer

So it seams to molex micro fit type plugs for smart effector are a wurth electronics and molex pins dont match

Hi
Any one know what exactly pins i need to duet and smart effector ?
I bought unfinished delta project (a lad making it sadly passed away and got it from his wife)
I got plugs but not all the pins so im going to order pins and complete printer
Thanks

Ok got it
So i got all shells and few wurth pins left
For smart effector i need molex microfit 3 female pins
Any one know if duet sells bags of wurth pins on its own ?