I just got a new Duet 2 Wifi and have been trying to run through the basic setup. I currently have a problem where it won't connect to my network. I've tried just about everything I can find to try and get it connected and it just won't connect. It was set up on a static IP so when I tried to ping the IP I got nothing back.
When I run the M552 S1 command after using M587 S"Network-SSID" P"Network-Pin" to input the network info, I get:
WiFi reported error: no known networks found
WiFi module is idle
If it helps, the blue light on the wifi module never comes on except for a brief flicker on startup. Here's the readout from the M122 command:
SENDING:M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03 running on Duet WiFi 1.02 or later
Board ID: 08DGM-917NK-F2MS4-7JTDJ-3SD6R-KDTSF
Used output buffers: 1 of 24 (10 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 93644 of which 0 recycled
Exception stack ram used: 288
Never used ram: 11460
Tasks: NETWORK(ready,1280) HEAT(blocked,1236) MAIN(running,3784) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:01:30 ago, cause: power up
Last software reset details not available
Error status: 0
[ERROR] Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 34.9, current 35.6, max 35.6
Supply voltage: min 1.6, current 1.7, max 1.7, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 183129687
Slowest loop: 4.88ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 200.56ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- WiFi -
Network state is running
WiFi module is idle
Failed messages: pending 0, notready 0, noresp 2
WiFi firmware version 1.23
WiFi MAC address a0:20:a6:32:50:3b
WiFi Vcc 3.43, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 28000
Socket states: 0 0 0 0 0 0 0 0