M587 S“NETGEAR36” P”xxxxxxxxxxxx480”

@dc42 yes sir. Duet microsd card. I don’t have one in the paneldue

Computer doesn’t give me any options. Just a message that it the card is unreadable. Even manually going to the card there are no options available to reformat on my Mac. I just put it in my windows machine and it let me reformat. I did fat 16 for the 4gb factory card and fat32 for the 32gb card I bought. Now the windows and Mac machine recognize them.

@dc42 I am having this same issue, about 2 weeks ago my 1 month old duet wifi memory card wiped itself. I replaced the card and the files and now, 2 weeks later, wiped again. It has not been removed or touched since it was installed. It was a different, new card. When I insert either original or the newest wiped card into the computer directly, it just says memory device unrecognizable. Duet v1.04 Both times seemed to happen when a job was paused and then canceled. After that, what I presume is the basic firmware/ software was on the PanelDue.

Well, theres 6 hours wasted.... There must be something that my MAC doesn't like. I opened Windows and ran commands via YAT. and everything went through perfectly the first time. I can now access the duet via it's assigned IP on the network. Thanks for the replies @dc42

M587 S“NETGEAR36” P”xxxxxxxxxxxx480”

I’m not by the computer right now to send an actual command, but I am using an iMac. I tried the commands from terminal and from the prontface interface. I also found that thread and another user mentioned straight “ vs slanted “. Im not really sure what that is or how to do it, but they posted a *** copy paste this exactly*** example of the users ssid and password, which fixed his problem. I copied and pasted that exact example but with my information and no change.

I also have windows on my Mac so I could try that or possibly a different windows pc? Just confused because It seems to communicate properly but doesn’t like something.

When I run M115, it says firmware version is
2.0. (I tried updating firmware via microsd card, but constantly got a file Duet2CombinedFirmware.bin not found, regardless of what it was named. )

SSID is 7 capital letters and 2 numbers, no spaces.

Password is 12 lowercase letters and 3 numbers, no spaces

No special characters used in either. WiFi security is set at WPA2-psk. Tried WPA2-psk/ WPA-psk and removing security all together. Rebooted router several times. Router is a netgear nighthawk r7000. I have only tried
connecting to the 2.4g network, not the 5.8g

Also, if I run just the M587 command (by itself), it does come back with one remembered network. It appears to be the one in the config.g file that came on the duet micronsd card. M588 S”*” returns, no networks found.

Hello all,

I am setting up a new duet2 wifi. I am using a MAC and using Terminal. I follow the getting started instructions up until the point where I need to send the M587 S"ssid" P"password" . Every iteration I have tried of this comes back with [M587: Bad or missing parameter]. I have also tried this in pronterface using ' in front of the lowercase letters with the same result. I have tried with power connected and usb connected and just with the usb connected. I have restarted my computer and changed USB ports. M552 shows that the wifi is idle. Any help would be greater appreciated. Thank you.