@jay_s_uk Yeah, I tried again. Same thing happened.
Latest posts made by ajith_pinninti
-
RE: Wifi not working after Update of firmware( Duet 2 Wifi)posted in Firmware installation
-
RE: Wifi not working after Update of firmware( Duet 2 Wifi)posted in Firmware installation
@Phaedrux
When I sent that command I got this
[20:26:15:626] Trying to connect at 230400 baud: success␊
[20:26:21:404] Erasing 4096 bytes...␊
[20:26:23:126] Erasing 196608 bytes...␊
[20:26:38:127] Erase failed␊
[20:26:38:127] Error: Installation failed due to timeout error␊Note:- All the motors are moving as expected when I'm sending commands serially. Only wifi is not working
-
Wifi not working after Update of firmware( Duet 2 Wifi)posted in Firmware installation
I've updated the firmware files through the Duet web interface. From after wifi is not blinking in powerup and not starting. I've changed the whole firmware with the old firmware that I used, It's not working again. I replaced the same SD card with another Duet, it's working as expected. But when I'm using that SD card in this Duet, wifi is not connecting.
When I try to update the wifi details, it shows
Wifi fails with "another SPI transfer pending.when I'm trying to update the firmware, it shows as below
[20:26:15:626] Trying to connect at 230400 baud: success␊
[20:26:21:404] Erasing 4096 bytes...␊
[20:26:23:126] Erasing 196608 bytes...␊
[20:26:38:127] Erase failed␊
[20:26:38:127] Error: Installation failed due to timeout error␊Can you please guide me with, this? This happened to my two new Duet 2 wifi boards when I tried to update the firmware through the web interface.
Thank you.