Best posts made by APlanetRider

UPDATE FIXED: Not entirely sure what was going on but I felt comfortable enough with the process to factory reset the board (hit erase). I then reflashed the 2.02 firmware found on https://github.com/dc42/RepRapFirmware/releases using BOSSA then reformatted my SD card and flashed the contents from https://github.com/T3P3/Duet/tree/master/Duet2/SD Card Contents. Before testing it I did use the configuration tool to generate the config files for my Anet A8 and put those on the SD card - I had to make sure the SD card was initialized using
M21 in the YAT terminal but I was able to get the WebControl working. One thing I did notice was that I had to update the drivers on my computer so that it would recognize the Duet board as "Duet2WifiorDuet2Ethernet3Dprintercontrolelectronics" versus "USB Serial Device COM_"