Posts made by Ariana

@dc42
Many Thanks.
The new released version works properly.

Hi All,
I am trying to compile the RepRapFirmware 3.3-dev for a Duet 3 Mainboard 6HC. I am using the 3.3-dev branches for CANlib, CoreN2G, FreeRTOS, and RRFLibraries.

I built them in the following order: CoreN2G->FreeRTOS->RRFLibraries->CANlib->RepRapFirmware.
All projects except RepRapFirmware were built successfully.

I encounter some of the errors related to the CAN when building RRF v3.3-dev :

Thank you for helping in advance.

@dc42
Thank you very much.
It works for me. I really appreciate your support and patience.
I added the following picture as a reference of the branch that I used for others.
Do not forget to add "crc32appender.exe" into your building path.

@dc42
Thank you for helping me.

The FreeRTOS issue was solved using the FreeRTOS-3.3-dev project which is great.
I added CoreN2G master project to solve the missing "core.h" however, I have got two other issues now.
one of them is in the RRFlibraries dev project:

and the other one is in the CoreN2G master project which I have added according to your recommendation:

Hi All,

I have followed the instruction to download and compile the firmware for Tool1LC however, encountered several problems. The first one is "core.h" in the RRFLibraries which is not in any projects that I downloaded. Could you please let me know what I did wrong? and what is the solution?
Thank you in advance.

Hey Guys,
Hope you are doing well.
Any chances that I can get the schematic and PCB of the new Version?
Thank you in advance.

@dc42 Thank you very much

Hi everyone,
I am new in this Forum. I tried to find the source firmware for the Toolboard 1LC, however I could not find.
Could you please let me know where can I find the source code of the given expansion board (Toolboard 1LC)?
Is there any state diagrams as well?
Many Thanks.