Moin, I just grilled my Duet TC daughterboard by shortening it with the hotend pin. In order to still print some christmas presents in time, I would like to replace it with an Adafruit Max 31856 that I have at hand. Iam using at DuetWifi in combination with a Duex5 so I guess it can only be connected to the TC daughterboard pins, correct? If so, GND should go to pin 2: GND, Vin to pin 8: 3,3V, SCK to pin 4:SPIO_SCK, SDO to pin 5: SPIO_MOSI, SDI to pin 6: SPIO_MISO and CS to pin 1: CS6 (or any other CS pin in case i want to stack them?), right?