Re: No movement when position command sent without G0/G1
I'm seeing the same issue as was mentioned in this post, with version 3.3 or 3.4b3. I can switch back to 2.05.1 and the issue disappears for the same GCODE CNC jobs.
For example, the following GCODE was generated by Carveco Maker, using their WorkBee postprocessor. (In inches here, but we also tried mm with the same result.) When I typed them in by hand, I noted that they all worked until the "Y" move. This and any subsequent Y move is ignored.
We found this out by trying to upgrade to 3.3 today, so as I mentioned we failed it back to 2.05.1 and the same jobs worked as expected. Definitely have M453 set in config.g. I also tried the Carveco Maker "GRBL" postprocessor generated files, same result. (And they generally seem to follow the same rules for creating GCODE, so really didn't look very different to me.)
If there's something off about these gcode jobs, I'll be happy to reach out to the Carveco folks for some guidance, but it would be helpful to know what needs changed. In the previous forum question I've referenced, it sounded like using this format is acceptable in CNC mode, so I'm not sure if this is a bug or perhaps a postprocessor issue.
Thanks for the support!
My version 3.3 config.g: