Topics created by carlosspr

If people are using the temperature compensation feature, I'll leave it in.

As FMA says, but add parameter S2 to that G1 command. You may need to move the motor at least one full step to clear the stall status, so about 0.2mm or a little higher instead of 0.01mm. You can put that command near the start of your homeall.g file.

The presence/absence of a fan can't be detected by the fan driver circuit.

The thermistor to monitor the heatsink temperature is probably the best option. Another option would be to use a 4-wire PWM-controllable fan (which needs to be driven a different way from the usual fans) and monitor the tacho output.