Here are the values. Sorry it took so long but I don't check the forum often.
Please remember I have a Hemera so the extruder settings will not match your hardware. I am using the stock Creality X, Y, Z motors so the rest should be ok.
; Maximum values
M201 X500.00 Y500.00 Z100.00 E1000.00 ; set maximum accelerations
M203 X6000.00 Y6000.00 Z300.00 E6000.00 ; set maximum speeds(6000 = 100mm/s)
M566 X480.00 Y480.00 Z24.00 E300.00 ; set maximum jerk
M906 X672 Y800 Z672 E850 I30 ; set motor currents (mA) and motor idle factor in per cent