Hello, it is me again.
Laser not firing in any release 3.6.0 from beta1 to RC1. Last working stable FW where laser works normally is Release 3.5.4.
I tried
G1 S0
G1 S254
M3 S254
and with or without
M563 P0 C"Laser"
T0
before any laser movement and also S parameter in G1, but laser not works.
My laser setting in config (Duet2 WiFi)
;#############LASER################
M308 S0 P"e0temp" Y"thermistor" A"LASER Temp" T100000 R4700 B3950 H0 L0 ; Definice temp. senzoru LASERu
M452 C"!exp.heater6" R255 F400 S1 ; Enable Laser mode, on out6, with max intensity being 255, and a PWM frequency of 400, S1 - Sticky parameter laser
M950 P10 C"e0heat+e1heat" ; Vytvor pin on/off 24V (napajeni regulatoru); Q - frekvence spinani
M42 P10 S1
G1 S0
; NASTROJ
;M563 P0 C"Laser" ; Definuj nastroj 0 LASER
;T0 ; Aktivuj nastroj 0
Thanks for investigating.