@jay_s_uk Pin 8 is getting 5v, and 24v to the 6pin
Latest posts made by Ckarg
-
RE: Z probe Smart effector 1000, tried other solutionsposted in Smart effector for delta printers
-
Z probe Smart effector 1000, tried other solutionsposted in Smart effector for delta printers
My Z probe is stuck at 1000. I have checked my wiring it seams to be wired correctly. Shorting pin 5 & 6 drops it to 0. The resistor on pin 5 is 1k. No fans connected well testing. No green led on boot up. The white leds turn on with fan. I am trying to be concise as I followed everything mentioned in:
https://forum.duet3d.com/topic/2739/z-probe-stuck-at-1000-with-smart-affector
Is there a way that I fried something?
Board: biqoctopuspro_1.0 (STMWiFi)
Firmware: RepRapFirmware for STM32F4 based Boards 3.3.0_16 (2022-02-13)
Duet WiFi Server Version: 1.26-05S-D; Z-Probe
M558 P5 R0.4 C"probe1" H5 F1200 T6000
M558 H30
G31 P100 X0 Y0 Z-.05