Posts made by CreateAndCarveCNC

@jay_s_uk Thank you

@Phaedrux Thank you very much.

Just a quick question, is there code to set the work XYZ to 0?

@Phaedrux yeah December 2024 I purchased. This would be perfect if it can be replaced

@jay_s_uk Sorry to pester, but I have ben running a job and it now keeps cutting out with this code

Warning: VIN under-voltage event (9.2V)

@jay_s_uk thank you very much for the help, really appreciate it

@jay_s_uk thank you for this. This helps a lot. So I just send the commands via YAT bypassing the problem for now?

@jay_s_uk can I? I didn't know that?

@jay_s_uk thank you, I need it asap to be honest, I have orders building up

@jay_s_uk said in Failed to initialise WiFi module:

ESP-WROOM-02U

Thank you, can you recommend a reliable place to purchase at all please?

@jay_s_uk The one I have is Duet2 Main W51596. It has an external aerial.

@jay_s_uk ok thank you, can you suggest the best place to purchase from please?

@jay_s_uk ok, thank you.

Would you say that would solve the problem or would I need a new one all together?

@jay_s_uk Do you think it is unsalvageable?

@Phaedrux

M552 S-1
ok<LF>
M552 S0
ok<LF>WiFi module started<LF>Error: Failed to initialise WiFi module: bad reply format version<LF>
M588 S"*"
Error: M588: Failed to reset the WiFi module to factory settings: WiFi module is disabled<LF>ok<LF>
M552 S1
ok<LF>WiFi module started<LF>Error: Failed to initialise WiFi module: bad reply format version<LF>
M997 S1
Trying to connect at 230400 baud: success<LF>Erasing 4096 bytes...<LF>Erasing 196608 bytes...<LF>Uploading file...<LF>5% complete<LF>10% complete<LF>15% complete<LF>20% complete<LF>25% complete<LF>30% complete<LF>35% complete<LF>40% complete<LF>45% complete<LF>50% complete<LF>55% complete<LF>60% complete<LF>65% complete<LF>70% complete<LF>75% complete<LF>80% complete<LF>85% complete<LF>90% complete<LF>95% complete<LF>Upload successful<LF>ok<LF>WiFi module started<LF>Error: Failed to initialise WiFi module: bad reply format version<LF>

@Phaedrux I purchased back in December last year with my CNC machine from Ooznest.
Yeah, It has been working perfectly fine for all this time, with almost daily use, up until the end of last week

@Phaedrux Unfortunately this hasn't worked, it is still showing the same message

Error: M589: Failed to retrieve own SSID data: WiFi module is disabled<LF>ok<LF>

ok<LF>WiFi module started<LF>Error: Failed to initialise WiFi module: bad reply format version<LF>

Error: M589: Failed to configure access point parameters: WiFi module is disabled<LF>ok<LF>

@dc42 this is the one on the SD card DuetWiFiServer.bin 255 KB Jun 16, 2021

@dc42 Thank you for getting back to me. I haven't changed anything just tried to reconnect it again so it did used to work.

Please can I have the instructions on how to get this information for you to check?

Many thanks

@jay_s_uk Thank you for replying. I have given this ago and it comes up with this

M997 S1
Trying to connect at 230400 baud: success<LF>Erasing 4096 bytes...<LF>Erasing 196608 bytes...<LF>Uploading file...<LF>5% complete<LF>10% complete<LF>15% complete<LF>20% complete<LF>25% complete<LF>30% complete<LF>35% complete<LF>40% complete<LF>45% complete<LF>50% complete<LF>55% complete<LF>60% complete<LF>65% complete<LF>70% complete<LF>75% complete<LF>80% complete<LF>85% complete<LF>90% complete<LF>95% complete<LF>Upload successful<LF>ok<LF>WiFi module started<LF>Error: Failed to initialise WiFi module: bad reply format version<LF>

Hello,

I am really stumped with how to proceed from here, my machine has been running perfectly until a few days ago when it throughout the day it kept dropping out and then right at the end of the day it completely stopped connecting. Here are some messages that are coming up...

M115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.3 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2021-06-15 21:45:03<LF>ok<LF>

M552 S0
ok<LF>WiFi module started<LF>Error: Failed to initialise WiFi module: bad reply format version<LF>

M552
WiFi module is disabled<LF>ok<LF>

M587 S"TP-Link_D0FA" P"96505182":
Error: M587: Failed to add SSID to remembered list: WiFi module is disabled

M588 S"*"
Error: M588: Failed to reset the WiFi module to factory settings: WiFi module is disabled

Is anyone able to help at all please?