Posts made by d7em67

literally i can't say thank u enough

number :1: was missing

I heat to annoy anyone but am really stuck her

i have cr-10 with the duet wifi i managed to make everything works despite my poor electronic skill and my language capability

bed tmp works great and run hotend dose not
i have tried every configuration and no luck and i have also checked the vssa and gnd reed less the 5 ohm then i checked the wires and everything seems ok

on the web interface the reding i get from the bed and the hotend is the same numbers but its actually the bed temperature only and when i disable the bed i get 2000.0C from the heater

made so many swaps between them no different
heter E0
thermister E0

; Heaters
M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0
M143 H0 S120 ; Set temperature limit for heater 0 to 120C
M305 P1 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 1
M143 H1 S280 ; Set temperature limit for heater 1 to 280C

thanks in advance for any help