Best posts made by dank0

Hello guys,
i bought very cheap Duet board but i cannot find any documentation for this. Is someone familiar with this board? do you guys have manual for it? thank you.

@t3p3tony I heat it up to 195C, measure 11cm, extruded 10cm with G1 E100 F60 and measure the rest and calculate. It extrudes perfect amount and keep 1CM. I think the e-steps are ok. I will try disable the bed compensation and let you know. thanks

@oliof I am living in Shenzhen (I am not chinese), China and i saw this board in the used electronic store - it cost $10 CAD. So i was wondering if is somehow usable - I have two Vorons 2.4 and one Creality CR6-SE printer. I am planing to build one more printer so i was thinking to use this board with reprap to just see what it can do

@fcwilt Thanks for the bed.g example - it works nicely

@oliof M115 returns:
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.4.5 ELECTRONICS: Duet WiFi 1.0 or 1.01 + DueX5 FIRMWARE_DATE: 2022-11-30 19:36:12

Hey guys, thanks for the help - I am finally printing

I have one more thing that bothers me. CURA
it prints the first 4 bottom and top 4 layers (solid ones) in proper speed, but areas where is just walls and infill are terrible slow. all my speeds in the Cura are set way higher, but the print is slow. Maybe someone had same issue before and know the solution. I also tried Simplify3D with same results.

My G-code flavor is Reprap
My Cura start code is

M140 S50
M190 S50
M116
G28
M400
T0 ; Select the tool
G29 S1 ; Load Mesh coordinates
M82 ; Absolute extrusion mode
M140 S{material_bed_temperature_layer_0}  ;Start heating bed
M190 S{material_bed_temperature_layer_0}  ;Wait for bed to reach temp before proceeding
M104 S{material_print_temperature_layer_0} ;Start heating extruder
M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp before proceeding
M98 P/sys/start_print.g

thanks for your time