Thanks for that, working on this now.

Great work
D

Hi All

Using the duet at the moment and all is good, running dual z, filament sensor (magnetic), dual filament motors and more, all good so far, what we need to do is the following and have no idea how at this stage, so I thought id ask you guys. Any help / Direction would be great.

Need:
Use and external simple button to trigger a gcode/macro event. (yes we can use a screen but in our case we are not, and can't)

Example use:
Press a button to unload the filament from the machine, IE with a input trigger (button press) run a pre-configured macro already created.

I know there are limited inputs so I'm hoping there are some great operators out there that can help.

Thanks heaps in advance for any help you can give.

D

Thanks for that, helps a lot.

Hi Everyone, firstly i'm not going to pretend to be an expert but i have some simple questions that i'm really hoping the user group can help with.

with regards to polar printing, i see that we can set the board to polar style printing, which is great but does this mean that the slicing application needs to export co-ordinates in polar form or Cartesian (x,y,z) form?

if polar does any one know of a polar slicer application?

any help and advice would be fantastic.
thanks in advance
Dave