@jay_s_uk I dont have a config-override
Latest posts made by Dqtreats
RE: Z Height
Idk what version I'm using. 2.0.2??
Im using a Duet 2 Wifi on a Delta, Tevo LlM
I figured out that the ONLY Z Height adjustments that I can find is by editing the MAX Height of the printer drive. Is there no possible way to offset this???? I cant do it by the config.g or even in the slicer.
I cant upload my config from my android.
I've went through multiple forums and went over the procedure time after time. I'm getting a reading of 0.98 when it comes to my Z Height. so I changed my Z on my G31 code and I cant get the printer to print on the bed. The only way I was able to, was by editing the Z offset in my slicer and it worked. However after a restart, it doesn't work anymore and lost its parameters. I don't have a config-override file, and my Bed.g doesn't have G31 in it. What else could be going on?
*Z offset on slicer wont work anymore. Only thing that works is finding the difference of my current bed height and adding or subtracting if from my M665 command at the top of my config.g file. I've had 3 people helping me with this and we've also changed config files but nothing changes.