Dweezy

undefined

This is my tribute to this amazing piece of hardware AND software.

CR-10 clone, Dual X, Dual Z, Dual 3in1 Hotend, 400x400x400.

Why i build this? Because over one year ago, marlin, mk4duo und some others told me: That isnt possible. And maybe because i'm multicolor addicted

Ready for 1st test-print in dual-mode

Dual X calibration

1st Dual Testprint
video 1

Middel of Dual Testprint
video 2

Finish of Dual Testprint
video 3

It was a long journey until now. Now comes 'finishing up' the 2 carriage. And ofc cleaning up the "improper" screws (which are NOT black) AND parts (which are NOT yellow OR black) which step-in as this project evolved.

Parts used:


- sweat
- blood
- nerves
- alcohol

- some sort of Duet Wifi
- some sort of Duex 5
- some sort of Paneldue 7"
- some sort of 11 stepper motors
- some sort of 2x THC-01 Hotend
- some sort of CR-10 S4 carriage
- some sort of SSR
- some sort of Keenovo 400x400 230V 1000W
- some tons of "only black" screws
- some shit load of cables.
- some sort of ONLY black pulleys, timing pulleys, belts.....you see it on the pictures ;)
- 24V built.


@dc42: <3 <3 <3 for this amazing piece of software.

undefined

the "magic" happens in Duet

So its more easier to use with a slicer.

The Hotends are "parked" when in standby / not used.

; tfree0.g
; called when tool 0 is freed
;
; generated by RepRapFirmware Configuration Tool on Fri Oct 12 2018 16:15:59 GMT+0200 (CEST)
M83                            ; relative extruder movement
G1 E-5 F3600                   ; retract 5mm
G10 P0 R180                    ; Standby temp = 180 degree
M106 S0                        ; turn off our print cooling fan
G91                            ; relative axis movement
G1 Z1 F500                     ; up 1mm
G90                            ; absolute axis movement
G1 S2 X-45 F6000               ; park the X carriage at -45mm

; tpost0.g
; called after tool 0 has been selected
;
; generated by RepRapFirmware Configuration Tool on Fri Oct 12 2018 16:15:59 GMT+0200 (CEST)
; Wait for set temperatures to be reached
M106 R2                        ; restore print cooling fan speed
M116 P0                        ; wait for tool 0 heaters to reach operating temperature
M83                            ; relative extruder movement
G1 E5 F3600                    ; extrude 2mm

undefined

Its called "NF THC-01"

undefined