For other peoples benefit i wanted to let you guys know that the Xtal value in the Panel Due schematic isn't correct.
It should be 12Mhz iso 8Mhz. I spent considerable time figuring this out but figured it out in the end.

Any one who is interested in a bare panel due v2.0 pcd boards ($20 + shippign) please let me know…

THanks,
Eddy

Hi Guys,

I built my own version of the Panel Due 2.0 board based on the schematics and pcb file on github but i am having a hard time getting it to work.
The issue that i have is when i plug the unprogrammed board into a USB port on the PC, the PC does not see the board as a USB device and does not start the driver process.
I checked all the voltages, oscillator, all pin connections etc and everything looks fine. I built a second board as well. Same issue.
Any suggestions? Should the USB work on a blank ATSAM3s2BA chip?

Thanks,
Eddy